Created on 02/18/2016

 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 2

MODEL

DSCY

3-way, 2-position, vent-to-shift diverter valve, normally open

SERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-31A

This vent-to-shift diverter valve is a 2-position, 3-way cartridge that is normally open from port 3 to port 4. When

port 1 is vented, the pressure differential between port 3 and port 1 exceeds the spring force causing the valve to

shift, thereby connecting port 3 to port 2.

TECHNICAL DATA

Maximum Operating Pressure 350 bar

Nominal Vent Flow 0,38 L/min.

Seal kit - Cartridge Buna: 990-031-007

Seal kit - Cartridge Polyurethane: 990-031-002

Seal kit - Cartridge Viton: 990-031-006

(X)CONTROL

X Not Adjustable

(E)MINIMUM CONTROL PRESSURE

E 75 psi (5 bar)

C 30 psi (2 bar)

D 50 psi (3,5 bar)

(N)SEAL MATERIAL

N Buna-N

V Viton

snhy.com/

DSCY

TECHNICAL FEATURES

This valve is not bistable; it is capable of modulating between the two positions shown.

Vent flow out of port 1 is pressure compensated and is listed in Technical Data.

There must be a pressure source at port 3, relative to port 1, to shift the valve.

One application of this valve is to be used in pairs to select between 2 motors or pumps.

One pilot valve may be used to vent multiple diverter valves if blocking checks are used at port 1 of each diverter. If blocking checks are not used there will be

interaction between high and low pressure legs of the circuit.

The vent-to-shift function is self cleaning and therefore insensitive to contamination.

Hardened spool and sleeve provide consistent and low spool leakage rates and excellent wear characteristics.

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge

machining variations.

PERFORMANCE CURVES

Model Code Example: DSCYXENCONFIGURATION OPTIONS